Multicolor DRL Boards General Install Guide


This install guide will give you some insight on install process of DRL Boards. The Process for installing DRL Boards is Generally the same for most headlights. Once headlights are opened up install is typically a breeze! Professional Install is recommended. 


Step 1: Remove headlights from vehicle.  (some vehicles require you to remove bumper to access headlights. For this step we recommend using a handy youtube video for help with your specific  vehicle bumper.) 

Step 2. Open headlights 

Step 3. Identity and remove the OEM White DRL Circuit Boards inside the headlights 

Step 4. Install the RGBW or Flow Series Multicolor DRL in place of the white circuit boards. Here is a video example of DRL install 

Step 5: Run wires out back of headlights and Test your components thoroughly

Step 6: Reseal Headlights 

Step 7: Reinstall headlights back on vehicle and Wire multicolor DRL circuit boards according to our wiring guide 


DRL Boards Install Example:




*DRL multicolor boards may be: circuit boards, LED Strips, Ribbons, or Individual LEDs depending on the specified headlight design 

*DRL Boards may be different size, shapes, designs, and brightness depending on the specified headlight 





Was this article helpful?
0 out of 0 found this helpful



Article is closed for comments.