Search

2015+ Dodge Charger Flow Series/ Color Chasing DRL Install Guide

  • Updated

main image (2).png

 

Product: 2015–2023 Dodge Charger Flow Series Color Chasing DRL Headlight Kit
Brand: RGB Halo Kits

🧰 Tools You’ll Need:

  • 🔧 Basic hand tool set – for removing bumper and headlights

  • ♨️ Oven or heat gun – for baking open headlights

  • 🌀 Rotary tool (Dremel) or oscillating tool – for cutting open headlights

  • 🪛 Flathead screwdriver – to help pry open headlight housings during disassembly

  • 🧴 Butyl headlight sealant – recommended for proper resealing

  • 🧷 Zip ties or adhesive pads – for wire management

  • 🔌 Wire glands – recommended for clean, weather-sealed wire exits

✅ Step 1: Test Your Product

Before installation, test your DRL kit to confirm all LEDs are functioning and you understand the wiring process.

  • Use the included wiring guide or view our Flow Series Wiring Guide for reference.

  • This helps catch any factory defects before disassembly.

🛠️ Step 2: Remove the Bumper

Gain access to the headlights by removing the front bumper.

🔓 Step 3: Open the Headlights

Choose one of the following methods: this headlight features permaseal sealant but can be opened by baking and prying in rounds of 2-3. 

  • Baking method (recommended if your handy)

  • Cutting method (recommended for beginners)

  • Our recommendation: try the baking method first and if unable to open then cut. 

➡️ Watch our full headlight opening + resealing video 

💡 Take your time—improper opening can damage the housing or lens.

💡 Step 4: Install the DRL Kit

  • Mount the Flow Series DRL boards into your headlight housings.

  • Align them with OEM light pipe locations or desired layout.

  • Secure in place using thermal adhesive or screws, if needed.

📺 Watch install demo

🧴 Step 5: Reseal the Headlights

  • Clean the channels and apply butyl or OEM-style sealant.

  • Use even heat to reseal if you baked the headlights.

➡️ Click here for resealing tips & full guide

⚡ Step 6: Final Wiring

If you haven’t already:

  • Connect your DRL boards to your Bluetooth controller and power source.

  • Reference your included wiring diagram 

  • or wire the turn signal portion using the video below

💬 Need Help?

We're here for you. Contact us at support@rgbhalokits.com or check our Help Center.

 

 

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.