Product Link
2014-2022 Infiniti Q50 RGBW DRL Boards – RGB Halo Kits
Step 1: Test your Product. This ensures no manufacturing defects are in the LEDS, and that you understand how to wire your product properly. See the wiring guide that comes with your product or visit our Wiring Guide.
Step 2: Remove your bumper to access headlights.
Step 3: Open your headlights. We recommend using the baking method. (*Headlights can be safely opened and resealed using the process outlined in the video below).
Step 4: Install your LED Product into your headlights.
Important Note for Flow Series Kits
The RGBW version shown in the video below has been discontinued and replaced by our Flow Series version.
For the Flow Series kit, the process for opening the headlights and installing the eyebrow portion is the same as shown in the video below. However, the installation of the lower strip/line DRL section is different because the Flow version uses a custom LED strip instead of replacement RGBW boards.
For the correct Flow Series strip installation process, please reference this updated video: https://youtube.com/shorts/CniUbo4Vg-w?si=B-bFJpitHRmACe6h
Step 5: Reseal your headlights (see video above) or click here for full guide.
Step 6: If you haven't already, wire your LED Product onto your car using the included wiring guide or see our general wiring guide.
Comments
0 comments
Article is closed for comments.