Flexible Accent Headlight Strips Install Guide

Product Link

Flexible Accent Headlight Strips | Multicolor – RGB Halo Kits

Install Guide:

Step 1: Test your Product. This ensures no manufacturing defects are in the LEDS, and that you understand how to wire your product properly. See the wiring guide that comes with your product or visit our Wiring Guide (RGBW/ RGBWA and Flow / Color Chasing)

Step 2: Remove your bumper to access headlights. (The process of accessing the headlight may differ depending on the vehicle. This step may or may not be necessary for your specific vehicle. For tailored instructions, you can consult our help center or search the web for vehicle-specific guidance on how to proceed.)

Step 3:  Open your headlights. (*Headlights can be safely opened and resealed using the process outlined in the video below)

Step 4: Install your LED Product into your headlights.

Step 5: Reseal your headlights (see video above) or click here for full guide. 

Step 6: If you haven't already, wire your LED Product onto your car using the included wiring guide or see our Wiring Guide.

Was this article helpful?
0 out of 0 found this helpful